DESCRIPTION

CRC Evapo-Rust Rust-Block is an effective, flash rust inhibitor for use immediately post rust removal. It leaves a dry film which acts as a short term barrier (up to 4 weeks indoors) preventing the treated surface from rusting prior to finishing.

Applications

CRC Evapo-Rust Rust-Block is suitable for use on fresh cut steel and items treated with CRC Evapo-Rust Ready to Use post rust removal.

Features/Benefits:

Flash rust inhibitor: Prevents flash rust from forming on freshly cut steel & post rust removal.

Dry film finish: Acts as a short term barrier protecting surfaces from rusting.

Compatible with most surface coatings: Can be primed and overcoated for long term rust protection.

Ideal for use after treating items with CRC Evapo-Rust Ready to Use.

For long term rust protection, CRC Evapo-Rust Rust-Block can be primed and overcoated. It is compatible with most surface coatings.

How to use CRC Evapo-Rust Rust-Block

For use immediately after rust removal or steel fabrication to prevent flash rusting.

Prior to application ensure the surface is completely rust free, clean and dry.

Shake can well. Hold can 15-20cm away from surface and spray with light strokes to achieve a light, even coating on the surface. Note: will leave a light, dry, transparent film on the surface.

Surface will be touch dry in 5-8 minutes and can be primed over if required. If overcoating follow manufacturer’s instructions. (If needing to remove, use Methylated spirits or similar).

Handy Hint: For long term rust protection, we recommend using a primer and sealer such as CRC Metal Armour or alternative CRC products such as Long Life or Soft Seal.

Note: CRC Evapo-Rust Rust-Block should not be used for long term rust protection but as an intermediary protection prior to finishing. Test on a small, inconspicuous area before use to assess material compatibility.

Product Code: 1758220

Click HERE for the Safety Data Sheet