ADOS MS Sealant is a high performance, one-component neutral curing adhesive sealant based on MS Polymers. It has excellent primerless adhesion to all materials commonly used in the demanding building, construction and engineering industries. It is ideal where silicone sealants are not suitable. BRANZ Appraised for White, Black & Grey.

ADOS MS Sealant is formulated for durable bonding, sealing and waterproofing gaps in dilation joints. This innovative product cures quickly in ambient temperatures and retains excellent bond strength, elasticity and tear resistance over the years. It skins over in a short time resisting dust and dirt pickup and can be applied in thick layers without shrinking or bubbling.

ADOS MS Sealant will not stain and is compatible with commonly used paint systems. It will not crack or show signs of aging when exposed to adverse weather conditions and harsh UV radiation. It does not contain solvents, isocyanates and silicones.

Features & Benefits

Excellent adhesion strength – To a wide range of substrates commonly used in the building, construction and engineering industries

Waterproofs, bonds and seals – Wide variety of application, one product does it all.

Paintable – Cured product can be painted with most solvent and water based paints and varnishes

Neutral cure – Contains no acids

Extreme flexibility – Excellent mechanical properties over a wide temperature range for use in dilation joints

Will not crack – No cracks and no signs of aging

Interior and exterior use

Low VOC, low odour – Contains no solvents or isocyanates

UV resistant – Resistant to adverse weather conditions and UV exposure

Durability – Excellent bond strength, tear resistance and elasticity is maintained over time, even years after application

Non-slump – Suitable for vertical joints

Extreme low shrinkage – Less than 1%, allows application in thick layers

Non-bubbling – The surface stays smooth and intact

Non-staining

Primerless one-component product – Convenient and time saving on construction sites

Cures fast – For increased productivity

Skins over in a short time – To resist dirt and dust pickup

Easy handling – Can be extruded from cartridges with a low force even in low temperatures

Totally chemically neutral

Good chemical resistance – To water, mild solvents, mineral oils, fat, low concentration anorganic acids and bases

Easy clean up – Just wipe up any excess uncured product with a wet cloth

Use on most substrates – PVC, concrete, brick, timber, glass, aluminium, iron, stainless, mild or galvanised steel, copper, brass, zinc, ceramic, plywood, masonry, cement plaster systems, many of the newly developed materials for construction, fiberglass, various plastics

Uses

Adheres to PVC, concrete, brick, timber, glass, aluminum, iron, stainless, mild or galvanized steel, copper, brass, ceramic, plywood, masonry, cement plaster systems, many of the newly developed materials for construction, fiberglass, various plastics.

Suitable for sealing gaps in expansion joints in concrete, brick, mortar, plumbing and roofing.

For joints in construction, on outer walls, in green houses. Especially suitable where dilation/expansion and stress occurs.

For sealing window frames, doors, fibre-cement siding, vinyl siding, roofing and gutters.

For joints that have to be painted.

Where silicone sealants are not suitable.

Suitable for adhering ceramic tiles and sanitary sealing in wet areas and timber.

For fabrication and repair of truck trailers and containers, buses, recreational vehicles, train cars, light-rail vehicles, mobile homes, refrigerated trucks, metal construction, yacht and boat building.

Ideal for exterior joint, gap and seam sealing on vehicle bodies, ventilation duct work and air conditioning.

Capable of withstanding moderate expansion-contraction cycles.

Interior and exterior use.

Product Code: 8364

9403097083641

Grey Cartridge 400 g

32.50cm H x 4.90cm W x 4.90cm D : 0.46kg