Product Code: 31535

AMBERSIL FORMULA SIX is a multi-purpose, medium duty, silicone mould release agent. It is based on silicones and has been formulated as a highly effective, general purpose release agent for all thermoplastics and many types of rubber.

AMBERSIL FORMULA SIX provides a medium duty film for release of plastic and rubber parts in injection moulding, compression moulding, vacuum forming and many other moulding and forming processes. AMBERSIL FORMULA SIX will not build up in the mould and helps to improve surface finish, reduce rejects and increases production.

AMBERSIL FORMULA SIX is fitted with 360⁰ spray system for use at any angle, even upside down. AMBERSIL FORMULA SIX is also useful as an anti-stick agent in the textiles, foam converting, printing and shoe industries.

N.B. Contains silicone so may be unsuitable where decorative work (e.g. painting, plating) is necessary on the moulded part. If a non-silicone product is required, use Ambersil Formula Seven or Ambersil Formula Four.

Features and Benefits

• A multi-purpose, medium duty, silicone mould release agent
• Improves surface finish and will not build up in the mould
• Reduces rejects and increases production
• Operational up to +200ºC
• Fitted with 360⁰ spray system for use at any angle, even upside down.
• Also useful as an anti-stick agent in the textiles, foam converting, printing and shoe industries

Uses

• Provides a medium duty film for release of plastic and rubber parts in injection moulding, compression moulding, vacuum forming and many other moulding and forming processes.
• Will not build up in the mould and helps to improve surface finish, reduce rejects and increases production. Also useful as an anti-stick agent in the textiles, foam converting, printing and shoe industries.

31535

5017419370100 Aerosol 400 ml

20.00cm H x 6.50cm W x 6.50cm D : 0.35kg