The RAZOR™ CUT 80 is designed for maximum performance, offering the highest level of cutting performance from Xcel-Arc’s range. Capable of clean cutting 30mm and severing 35mm, this machine is for the professional needing maximum power from a portable machine.

PILOT ARC START

Pilot Arc Start lets you start the arc before contacting the work piece. This gives you better control of the torch, especially on materials with uneven or curved surfaces.

MACHINE SPECIFICATIONS

PRIMARY INPUT VOLTAGE: 415V Three Phase

SUPPLY PLUG: No plug supplied (32 AMP Recommended)

RATED INPUT POWER (kVA): 15.0

Ieff (A): 12.6

NO LOAD VOLTAGE (V): 310

PROTECTION CLASS: IP21S

INSULATION CLASS: F

MINIMUM GENERATOR (kVA): 15.0

DINSE CONNECTOR: Euro

STANDARD: AS/NZ60974-1

WARRANTY (Years): 3

Size & Weight
DIMENSIONS (mm) 560x220x415mm

WEIGHT (kg) 16kg

PLASMA CUT SPECIFICATIONS

PLASMA CUT CURRENT RANGE 20-80A

PLASMA CUT DUTY CYCLE @ 40°C 40% @ 80A

MILD STEEL CUT THICKNESS 30mm

MILD STEEL SEVERANCE THICKNESS 35mm

ALUMINIUM CUT THICKNESS 16mm

ALUMINIUM SEVERANCE THICKNESS 20mm

STAINLESS STEEL CUT THICKNESS 16mm

STAINLESS STEEL SEVERANCE THICKNESS 20mm

AIR FLOW DRAW OFF (L/min) 189

AIR FLOW PRESSURE (Bar) 5.17 (75 psi)

PLASMA ARC START Pilot Arc

MACHINE FEATURES

THERMAL OVERLOAD PROTECTION

Over Temperature Warning

Product Code: XA-CUT80RZ-K